ROUGH COUNTRY SUSPENSION
2007-2013 JEEP WRANGLER JK 4DR 3.5" KIT
The Rough Country Series II Jeep Wrangler JK Unlimited (4-Door) 3.5" Lift Kit is specifically designed to give the
smoothest highway ride while maintaining great off-road performance.
Rough Country engineers each component, focusing on meeting and
exceeding the OEM standards that set the bar for stock Jeep equipment.
Everything from ensuring the angle of your track-bar to maximizing
vibration absorption via rubber bushings - this kit will
give you the best of both worlds.
Lifted coil springs, fixed lower control arms
with OEM style rubber bushings, track bar drop bracket, drop pitman arm,
brake line relocation brackets & hardware. Rear:
Lifted coils springs, track bar drop
bracket, coil correction plates, extended sway bar links, brake line
relocation brackets & hardware. Shocks:
Features (4) Rough Country N2.0 series shocks.
- • Factory tuned coil springs based on stock
- • Coil correction plates corrects the rear coil angle 10 degrees.
- • Coil correction plates allows the rear coil springs to function more efficiently.
- • Increased ground clearance.
- • Application valved Premium N2.0 series shocks.
- • Levels the front with the rear of the Jeep.
- • Unique coil spring rates for 4-door models.
On Automatic transmission-equipped vehicles, due to use of an oversize driveshaft
from the factory and inadequate factory clearance, it may be possible for
the front driveshaft to come in contact with the automatic transmission
pan tearing the factory boot and rubbing on the shaft. Generally this
occurs during heavy articulation when front sway bar links are
disconnected and longer shocks are installed. If this is found to occur,
the proper procedure would be to replace the oversize factory shaft
with an aftermarket smaller diameter shaft to increase clearance between
the transmission and front driveshaft. Rough Country does offer this
driveshaft if needed.
2012-2013 models also require exhaust modification to clear front driveshaft.